Lighting

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

- Ultra brightness red COB LED - Max. Lumens: 50LM (FL-1 tested) - Max.Runtime: 53 hrs (FL-1 tested) - Battery Type : LI-PO - Recharge Time: 2hrs - Size (W x D x H): 42 x 31.5 x 20.2mm - Weight: 22g

These handy little handlebar accessories are activated by your bike's motion, so they're ready to go whenever you are! - Motion-activated lights - One LED per plug - Mounts easily into standard (17.5–19mm internal diameter) handlebars

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Replacement LED assembly for the Centro LED helmet.

Our latest to-see-by headlight, the Flash 300 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 700mAh battery pack, the Flash 300 will deliver 300 lumens for 1.5 hours, all the way up to 75 lumens for 6 hours. In Flash mode, you get 150 lumens for 12 hours. - 700mAh rechargeable Li-ion battery pack is an economical choice that delivers real-world usable lumens and runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 150 lumens for 12:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 300 lumens for 1:30 hours - Steady Low mode: 75 lumens for 6:00 hours - Steady Medium mode: 150 lumens for 3:00 hours

Our latest to-see-by headlight, the Flash 500 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 1400mAh battery pack, the Flash 500 will deliver 500 lumens for 2 hours, all the way up to 125 lumens for 8 hours. 250 lumens of Flash mode gives you a whopping 16 hours of runtime. - CREE XP-G3 LED delivers big-time lumens. - Class-leading 1400mAh rechargeable Li-ion battery pack to back up those lumens with real-world usable runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 250 lumens for 16:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 500 lumens for 2:00 hours - Steady Low mode: 125 lumens for 8:00 hours - Steady Medium mode: 250 lumens for 4:00 hours

With the Flash Headlight/Taillight Combo, you're equipped with everything you need to be seen—day or night. It features up to 70 lumens in the front and 20 lumens in the rear, and it features the versatility of four light modes, ranging from steady and strong to flashing and brilliant. Increase your visibility with the Flash Headlight/Taillight Combo. - Headlight: 20- to 70-lumen output. - Headlight: 2 hours to 24 hours runtime. - Tail light: 5- to 20-lumen output. - Tail light: 2 hours to 20 hours runtime. - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays, helmets, and saddle bags. - Four headlight modes including: Steady (55 lumens), Power Flash (70 lumens), Disco Flash (55 lumens), Eco Flash (20 lumens) - Four taillight modes including: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens)

Heading out after dark and need lights? Look no further than the Flash Pack. This combo kit includes the new Flash 300 headlight with our tried-and-true Flashback taillight. See where you are going, and be seen by motorists, all the while not breaking the bank. Whether you are an all-conditions commuter or a student riding across campus, the Flash Pack has got you covered. - Single-LED headlight oval beam pattern gives a perfect blend of spot and peripheral visibility. Single-LED taillight for rear visibility. - 700 + 200mAh rechargeable Li-ion batteries charge in 2:00 hours each with included micro USB cables. - Headlight installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - O-ring mount (extra o-ring included) fits all round seatposts. - IPX7 waterproof means these lights will be there when you need them, even in the hardest rain. - White Steady High mode: 300 lumens for 1:30 hours - White Steady Medium mode: 150 lumens for 3:00 hours - White Steady Low mode: 75 lumens for 6:00 hours - White Flash mode: 150 lumens for 12:00 hours - Red Steady mode: 10 lumens for 2:00 hours - Red Power Flash mode: 20 lumens for 4:00 hours - Red Disco Flash mode: 14 lumens for 6:00 hours - Red Eco Flash mode: 5 lumens for 20:00 hours

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

Want to run your Flux headlight on the latest trail bikes? You're going to need this mount for your 35mm cockpit. - Quick-release extruded aluminum handlebar clamp. - Clamp fits 35.0mm handelbars.

Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.

Day or night, the Stix Elite headlight packs a powerful punch. Running in Steady-High mode at night, it delivers 100 lumens of focused, strong, and bright light to guide your way. It’s a true to-see-by headlight. During the day, your visibility and safety becomes its first priority. Running in Power Flash mode, this tiny package delivers 200 lumens-worth of, “see me now,” light, making it a beacon for all road users. And depending on the chosen mode, the Stix Elite will run for up to 112 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 200 lumens output - Spherical lens delivers a to-see-by beam pattern. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 112-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebars from 22.2mm up to 35mm in diameter - Six modes including: Steady High (100 lumens), Steady Low (38 lumens), Power Surge (97 lumens), Power Flash (200 lumens), Disco Flash (63 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

With the Stix Switch 2-Pack, your lighting options are endless. How? The Stix Switch features the ability to switch between red and white modes with a simple, long press of the power button. So, if you need extra light up front, more visibility at the rear, or a traditional front/rear combo, the Stix Switch 2-Pack delivers. - 2 to 20-hour runtime - Headlight or taillight—you decide - Fresnel lens for maximum visibility in all directions - Red/Green battery charge level indicator - Three white modes: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens) - Five red modes: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays - Additional mounting options available (sold separately)

A true two-in-one, the Stix Switch comes at you with a ying/yang mindset, flipping between red or white modes depending on your ride needs. Simply press and hold the button and you can go from a bright red taillight to a simple white headlight in seconds. Increase visibility and flexibility with the Stix Switch. - Headlight or taillight—you decide. - Press-and-hold for two seconds to shift between white and red modes. - Three white modes including: Steady (65 lumens), Power Flash (100 lumens), Eco Flash (35 lumens). - Five red modes including: Steady (18 lumens), Surge Glow (16 lumens), Power Flash (30 lumens), Disco Flash (15 lumens), Eco Flash (8 lumens) - 2- to 20-hour runtime. - Fresnel lens for maximum visibility in all directions. - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays. (Aero strap mount available separately). - Red/Green battery charge level indicator. - Additional mounting options available separately.

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, and that's why we created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. Mako 250 - Low cost, high powered light - Highly visible in traffic = keeps you safe - Run Time: 7:00 – 28:00 hours - 3 light settings—High, Low, and Flash - Tough durable design - Water / Dust Resistant IP64 Rated CherryBomb 100 - Daylight Visible Flash (DVF) - Up to 136 hour run time - Visible up to 1 mile - Internal reflector = visible if light in off mode - Easy to operate AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - Water / Dust Resistant IP64 Rated